Filter
Top Products
364 Scanning
Sending the Scanned File on the Network
1
Load the document(s) facing up with top edge in first into the DADF.
OR
Place a single document facing down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document."
2
Press the
(Home)
button.
3
Select
Scan Menu
.
4
Select
Network
.
5
Select until the desired address appears and then select that address.
6
Select
OK
.
7
Specify scan options such as
Output Color
,
Resolution
,
2 Sided Scanning
, and
File Format
on
the
Scan to Network
,
Quality
and
Options tabs
. For details, see "File Format."
8
Press the
(Start)
button to begin sending the scanned file.
Scanning to a USB Memory
The Scan to USB Memory feature allows you to store scanned image directly to a USB memory attached to the
printer without using software.
Types of a USB Memory
You can use a USB memory with the following interfaces:
•USB 1.1
•USB 2.0
The USB memory must be formatted in FAT file systems (FAT16, FAT32, or VFAT) before inserting the memory
device into the front USB port of the printer.
(5) Path Enter the subdirectory path where you want the scanned document to be stored. Ensure that the
subdirectory path is already created in the shared folder or FTP server.
(6) Login Name Enter the user account name to allow access to a shared folder on your computer or to a FTP server.
• For Computer: Windows login name that you have specified in the procedure 1.
• For Server: Contact the system administrator.
(7) Login Password Enter the password corresponding to the above login name.
• For Computer: Empty password is not valid in the
Network(Computer)
feature. Ensure that you
have a valid password for the user login account. (See "Setting a Login Name and a Password (SMB Only)"
for details on how to add a password in your user login account.)
• For Server: Contact the system administrator.
(8) Confirm Login
Password
Re-enter your password.
(9) Port Number Enter the Server Port Number. If you are unsure, you can enter the default value of 139 for Computer and
21 for FTP server.
Available ports are:
For Computer: 139, 445, 5000 - 65535
For Server: 21, 5000 - 65535