Filter
Top Products
8-10 Dell Precision 210 Desktop Systems User’s Guide
To remove a DIMM, press the securing clips outward simultaneously until the DIMM
disengages from the socket (see Figure 8-7). It should pop out slightly.
0LFURSURFHVVRU8SJUDGHV
To take advantage of future options in speed and functionality, you can add a second
processor or replace either the primary or secondary processor.
Each processor and its associated level-2 (L2) cache memory are contained in an SEC
cartridge that is installed in a dedicated connector on the system board. In systems
with only one processor, a terminator card is installed in the secondary processor con-
nector. The following subsection describes how to install or replace an SEC cartridge
in either the primary or secondary processor connector.
$GGLQJRU5HSODFLQJD0LFURSURFHVVRU
The following items are included in a microprocessor upgrade kit:
The new microprocessor SEC cartridge with attached heat sink
Two heat-sink securing thumbscrews
Use the following procedure to add or replace an SEC cartridge.
NOTE: Dell recommends that only a technically knowledgeable person perform this
procedure.
1. Remove the computer cover according to the instructions in “Removing the
Computer Cover” in Chapter 7.