Filter
Top Products
Installing Drives 9-11
.
4. Slide the drive into the chosen bay of the bracket, orienting it so that the connec-
tors on the back of the drive face the inside of the chassis when the bracket is
reinstalled and so that the drive is in the left-most position in the bracket (see Fig-
ure 9-10).
You must install a drive in the primary drive bay. The primary drive bay is the left-
most bay in the bracket and is marked as “HD1” on the top surface of the
bracket. The secondary drive bay is marked as “HD2.”
hooks (3)
removable
hard-disk drive
bracket
latch
screw
drive bay
1-inch drive (back)
screws (4)
hooks (3)
drive bracket