Filter
Top Products
C-8 Dell Precision 210 Desktop Systems User’s Guide
ERROR: Could not read
NVS, Error=Internal
Error Code.
An attempt to read the
NVRAM failed.
See the chapter titled “Getting Help” in your
Diagnostics and Troubleshooting Guide
for
instructions on obtaining technical assistance.
ERROR: Failed NVS
write. Error=Internal
Error Code.
An attempt to write to
NVRAM failed.
Run the Dell Diagnostics to verify the integrity
of your system NVRAM. See the chapter
titled “Running the Dell Diagnostics” in your
Diagnostics and Troubleshooting Guide
for
instructions.
If you are unable to determine the cause of
the error, see the chapter titled “Getting
Help” in your
Diagnostics and Troubleshooting
Guide
for instructions on obtaining technical
assistance.
ERROR: Failed to acti-
vate device, CSN=Card
Select Number.
A Plug and Play expansion
card could not be
activated.
Use the following procedure:
1. Exit the ICU and turn off your system.
2. Remove the Plug and Play expansion
card that could not be activated.
Follow steps 2 through 5 of “Removing
an Expansion Card” in Chapter 8, and
then return to this procedure.
3. Reinstall the Plug and Play expansion
card.
Follow steps 4 through 8 of “Installing an
Expansion Card” in Chapter 8, and then
return to this procedure.
If you still receive the error message, contact
the manufacturer of the Plug and Play expan-
sion card for assistance.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.