Filter
Top Products
Overview: Additional Information
PmT1 and PmE1 User’s Manual 10002367-02
1-6
RoHS Compliance
The PmT1 and PmE1 are compliant with the European Union’s RoHS (Restriction of Use of
Hazardous Substances) directive created to limit harm to the environment and human
health by restricting the use of harmful substances in electrical and electronic equipment.
Effective July 1, 2006, RoHS restricts the use of six substances: cadmium (Cd), mercury
(Hg), hexavalent chromium (Cr (VI)), polybrominated biphenyls (PBBs), polybrominated
diphenyl ethers (PBDEs) and lead (Pb). Configurations that are 5-of-6 are built with tin-lead
solder per the lead-in-solder RoHS exemption.
To obtain a certificate of conformity (CoC) for the PmT1 and PmE1 modules, send an
e-mail to sales@artesyncp.com or call 1-800-356-9602. Have the part number(s) (e.g.,
C000####-##) for your configuration(s) available when contacting Emerson.
Terminology and Notation
Active low signals: An active low signal is indicated with an asterisk * after the signal name.
Byte, word: Throughout this manual byte refers to 8 bits, word refers to 16 bits, and long word refers to
32 bits, double long word refers to 64 bits.
PLD: This manual uses the acronym, PLD, as a generic term for programmable logic device (also
known as FPGA, CPLD, EPLD, etc.).
Radix 2 and 16: Hexadecimal numbers end with a subscript 16. Binary numbers are shown with a
subscript 2.
Technical References
Further information on basic operation and programming of the PmT1 and PmE1 compo-
nents can be found in the following documents:
Table 1-5: Technical References
Device / Interface: Document:
1
Controller, T1/E1 DS2153Q, E1 Single Chip Transceiver Data Sheet
(Dallas Semiconductor, REV: 01106)
DS2151Q, T1 Single Chip Transceiver Data Sheet
(Dallas Semiconductor, REV: 011706)
Application Note 342; DS2151, DS2153 Initialization and Programming
(Dallas Semiconductor, 102899)
http://www.maxim-ic.com/
CPU MPC860P PowerQUICC™ Technical Summary
(Freescale Semiconductor, 07/2004 Rev. 3)
http://www.freescale.com/