Filter
Top Products
10002367-02 PmT1 and PmE1 User’s Manual
i
Regulatory Agency Warnings & Notices
The Emerson PmT1 and PmE1 meets the requirements set forth by the Federal Communi-
cations Commission (FCC) in Title 47 of the Code of Federal Regulations. The following
information is provided as required by this agency.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
FCC RULES AND REGULATIONS — PART 15
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will be required to correct the interfer-
ence at his own expense.
Caution: Making changes or modifications to the PmT1 and PmE1 hardware without the explicit
consent of Emerson Network Power could invalidate the user’s authority to operate this
equipment.
EMC COMPLIANCE
The electromagnetic compatibility (EMC) tests used a PmT1 and PmE1 model that includes
a front panel assembly from Emerson Network Power.
Caution: For applications where the PmT1 and PmE1 is provided without a front panel, or where the
front panel has been removed, your system chassis/enclosure must provide the required
electromagnetic interference (EMI) shielding to maintain EMC compliance.
FCC RULES AND REGULATIONS — PART 68
This equipment complies with Part 68 of the FCC rules. There is a label on the PmT1 and
PmE1 board that contains the FCC registration number. If requested, this information must
be provided to the telephone company.
!
!