Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
4-62
Resolving a Invalid Ribbon Error
Step Procedure
2 Verify that the Ribbon installed is designed for the correct Printer model.
3 Press on the Resume button.
If the issue persists, continue to Step 4.
4 Remove the rear cover and check that the Ribbon RFID cable is securely
connected to the Main Board (J-5) and the RFID Sensor.
• If the connections are loose, reattach
• Press on the Resume button..
• If the connections are good or if the issue persists, continue to Step 5.
5 Replace the Ribbon RFID Sensor.