FARGO electronic HDP600-LC CR100 Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
2-11
Technical Specifications (continued)
Term Description
Print Ribbon
Options
HDP600 and HDP600-LC:
Full color, YMC, 700 prints
Full color with resin black, YMCK, 250 or 500 prints
Full color with two resin black Panels, YMCKK, 400 prints
HDP600 CR100 and HDP600-LC CR100:
Full color with two resin black Panels, YMCKK, 400 prints
Full color with resin black and YMCKK, 400 prints; extra wide for
over-the-edge printing on CR-100 cards
All HDP Ribbons utilize Fargo's exclusive RibbonTraq™ system for
maximum print quality, performance, reliability and ease of use.
Note No. 1 (CR100): The YMCKH and YMCKK Ribbons are used
on the HDP600/HDP600-LC Printers and the HDP600
CR100/HDP600-LC CR100 Printers.
Note No. 2 (HDP600 print ribbons): Indicates the ribbon type and
the number of ribbon panels printed where Y=Yellow, M=Magenta,
C=Cyan, K=Resin Black, O=Overlay, F=Fluorescing.
Print Speed-
Batch Mode
HDP600 and HDP600-LC (see note below):
35 seconds per card/112 cards per hour (YMC with transfer)
40 seconds per card/94 cards per hour (YMCK with transfer)
72 seconds per card/54 cards per hour (YMCKK with transfer)
40 seconds per card/90 cards per hour (YMCK/Lamination)
72 seconds per card/50 cards per hour (YMCKK/Lamination)
HDP600 CR100 and HDP600-LC CR100 (see note below):
85 seconds per card/45 cards per hour (YMCKK with Transfer)
93 seconds per card/45 cards per hour (YMCKK/Lamination)
Print speed indicates an approximate print speed and is measured
from the time a card feeds into the Printer to the time it ejects from
the Printer.
Print speeds do not include encoding time or the time needed
for the PC to process the image.
Process time is dependent on the size of the file, the CPU,
amount of RAM and the amount of available resources at the
time of the print.