Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
4-64
Resolving a Wrong Ribbon Error
Step Procedure
2 Verify the Driver settings are correct.
a. Open the Printer Control Panel from the Computer.
• If using Windows 98SE, Me, right click on the HDP600 Card Printer
Icon and select Properties.
• If using Windows 2000/XP, right click on the HDP600 Card Printer
and select Printing Preferences.
b. Click on the Device Option tab.
c. Click on the auto select button.
d. Check that the Ribbon type matches the Ribbon selected.
3 Press on the Resume button.
If the issue persists, continue to Step 4.
4 Remove the rear cover and check that the Ribbon RFID cable is securely
connected to the Main Board (J-5) and the RFID Sensor.
• If the connections are loose, reattach it.
• Press on the Resume button.
• If the connections are good or if the issue persists, continue to Step 5.
5 Replace the Ribbon RFID Sensor.