Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
3-19
Connecting power to the HDP600 Printer
Caution: Do not remove the red Warning sticker across the USB connection. Do
not plug in the USB cable until prompted to do so during the installation of the HDP600
Printer Driver. See the Installing the HDP600 Printer Driver
procedure (Step 10).
(Note: The diagram shown below displays a USB Printer connection. If working with a
Parallel or Ethernet port, the port will be in the same location as the USB connection.)
Step Procedure
1 The Printer connections are shown in the eight (8) photos (Displays A to H) in
this section.
Display A – Viewing the Printer Connections of the HDP600-LC Card
Printer/Encoder (see below)