FARGO electronic HDP600-LC CR100 Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
5-58
Reviewing Frequently-asked Questions
Question Answer
How do I know if my
Printer has the Ethernet
option installed?
If your Printer has the RJ45 connector installed on the
back of the Printer, then it has this Ethernet option
installed.
Can my non-Ethernet-
enabled Printer be
upgraded to have an
Ethernet interface?
No.
What PC operating
systems work with my
Ethernet Printer?
The Windows 2000/ XP / Server 2003 operating systems
work with your Ethernet Printer.
How do I connect my
Printer to my network?
You can connect from the RJ45 network connection on the
back of your Printer to an available connection on your
network (not directly to your PC).
You can use a good CAT-5 or better cable to make this
connection.
How can I find the MAC
address of my Ethernet
Printer?
If you know the IP address of your Printer, you can access
this through the home web page of the Print Server. See
Reviewing the Reviewing the HDP600 Home Page
.
OR
If you do not know the IP address or the Printer does not
work with a usable IP address, then the MAC Address can
be found using the tool Fargo IP-Tracer. (Note: This can
be installed and used to locate all the Fargo-compatible
Printers on your network.)