FARGO electronic HDP600-LC CR100 Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
7-15
Using the Card tab (HDP600 CR100/HDP600-LC
CR100)
Step Procedure
1 Select the appropriate card size option from two (2) standard card sizes.
CR-100
OR
One (1) custom size is available.
(Note: The dimensions of the total print area for each card size will appear
in the Print Width and Print Length boxes. These print area dimensions are
.04" (1mm) larger than the actual card size. This is so the Printer can
overprint images to ensure they will appear Edge-to-Edge when transferred
to the card. For this reason, when designing a card format, always set the
card size or page size within the card design program to the exact Print
Length and Width dimensions listed in the Printer Driver.)
This Printer Driver will be provided at a future date.