Filter
Top Products
151
PRIMERGY TX200 S2 User’s Guide
5
Operations after OS Installation
■ Creating a DOS Floppy Disk
Start up ServerStart and confirm that the [Welcome to ServerStart] window is displayed.
1 Click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.
2 Click [DOS Diskette].
Insert the prepared floppy disk by following the message.
3 Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The DOS floppy disk will be created automatically.
When a message appears indicating that the disk is created, click [OK] and eject the disk.
5.4.2 Creating a Hardware Configuration Tool
This section explains how to create a Hardware Configuration Tool from the ServerStart CD-ROM.
Prepare floppy disks as many as the tools you want to create beforehand.
Types of a Hardware Configuration Tool vary by model.
1 Start up ServerStart and click [FloppyBuilder].
For details on procedures for starting up ServerStart, refer to "■ Starting ServerStart" (pg.149).
2 Click [Hardware Configuration Tools].
3 Click the tool you want to create.
Insert the prepared floppy disk by following the message.