Filter
Top Products
246
Chapter 8 Configuring Hardware and Utilities
Set System Password Sets a system password.
Setting a system password makes it necessary to enter the password in order to
access this server.
A setup password must be specified.
Press the [Enter] key to display the password input window. Enter the setup
password. For more details, refer to "9.4.2 Security against Unauthorized Use"
(pg.285).
System Password Mode • System (at the time of
purchase)
• Keyboard
Sets the scope protected by the system password.
This setting is possible when a setup password and
system password are both specified.
System Load • Standard (at the time of
purchase)
• Diskette/CDROM Lock
Sets whether to enable or disable system startup
from a floppy disk or CD-ROM.
Setup Prompt • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to display a setup message
"<F2>BIOS Setup/<F12>BOOT Menu" on the
[POST] window during system startup.
Virus Warning Disabled (Fixed parameter) Sets whether or not to check the boot sector of the
hard disk drive after the previous system startup. If
the boot sector is changed without a clear reason, it
is necessary to scan the system for computer viruses
with a virus detection program.
Diskette Write • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to allow writing on a floppy
disk.
Flash Write • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to allow writing on the BIOS
Flash ROM.
table: Items on the Security Menu
Item Setting Description