Filter
Top Products
207
PRIMERGY TX200 S2 User’s Guide
Installing hardware options
7
7.6.2 Installable Internal Hard Disk Units and Notes
Before installing an internal hard disk unit, check the following points.
■ Installable Internal Hard Disk Units
The following types of SCSI hard disks can be installed in this server.
■ Notes
Note the following points to avoid failures:
• Inside the hard disk unit, the disk for storing data is rotating at high speed to read and write data.
Because this server is very delicate, do not move, strike, or shake it when it is turned on.
• Do not use or store the device in a location affected by extreme temperature changes.
• Keep the device away from direct sunlight and from radiators or other heat source.
• Use or store the device on a shock-and-vibration free surface.
• Do not use or store the device in a humid or dusty place.
• Do not use or store the device near magnets or devices that generate magnetic fields.
• Do not disassemble or take the device apart.
• Keep the disk away from condensation or water droplets.
Mishandling could result in destruction of the data stored in the disk. Make sure to keep a backup of
important data. Even if the hard disk is of the same type, there could be a slight difference in storage
capacity. We recommend backing up data on the basis of files or sectors rather than hard disks.
table: Installable Internal Hard Disk Units
Disk capacity Model number Overview
73.4GB PG-HDH71K Ultra320 SCSI, 10,000rpm
73.4GB PG-HDH75K Ultra320 SCSI, 15,000rpm
146.8GB PG-HDH41K Ultra320 SCSI, 10,000rpm
300GB PG-HDH31K Ultra320 SCSI, 10,000rpm