Filter
Top Products
214
Chapter 7 Installing Hardware Options
7.7 Installing 5-inch Internal Options
This section explains how to install a 5-inch internal device like DAT(72) unit. Unlike
external devices, internal device does not need to be connected to the outlet
because its power is supplied from the server. In addition, it offers the advantage of
space saving.
Before adding a 5-inch internal device, install the OS and turn off the server.
7.7.1 Where to Install 5-inch Internal Devices
Install 5-inch internal devices in 5-inch storage bays.
• When installing or removing internal devices, turn off the server, all peripheral
devices, and any other connected devices. Also unplug all power cables from
the outlet.
Failure to do so can cause electric shock.
• Install our genuine internal devices only.
Failure to do so may cause a device failure, fire, or electric shock.
• When installing or removing hardware options, make sure to remove the
screws on the specified points only.
There is a chance of injury if screws other than those on the specified points
are removed. This could also damage the server.
• Touch only the specified part of the printed circuit board.
Failure to do so could cause injury and also damage the server.
5 inch
storage
bay
[Inside]