Filter
Top Products
243
PRIMERGY TX200 S2 User’s Guide
8
Configuring Hardware and utilities
8.2.9 Power On/Off Submenu
Configures power On/Off settings.
table: Items on the Power On/Off Submenu
Item Setting Description
Power Off Source
Software • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to enable the power to be turned
off using a program or the operating system.
Power Button • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to allow the use of the power
switch for turning the power off, when the ACPI
function is disabled.
Power On Source • BIOS Controlled (at the
time of purchase)
• ACPI Controlled
Configures the power-on setting.
Remote • Disabled
• Enabled (at the time of
purchase)
Sets whether or not the power is turned on when the
modem (connected to the serial port) receives a ring
signal.
LAN • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to enable the power to be turned
on via LAN.
Wake Up Timer Disabled (Fixed parameter) Sets whether or not the power is turned on at a
certain time or after a certain time has passed. A
separate program is necessary for setting startup
time.
Wake Up Time Displays the startup time when using "Wake Up Timer".
Wake Up Mode Displays the startup mode when using "Wake Up Timer".
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
Advanced System Configuration
Power Off Source
Software:
Power Button:
Power On Source
Remote:
LAN:
Wake up Timer:
Wake up Time:
Wake up Mode:
Power Failure Recovery:
[Enabled]
[Enabled]
[Bios Controlled]
[Enabled]
[Enabled]
[Disabled]
[00:00:00]
[Dally]
[Previous State]