Filter
Top Products
249
PRIMERGY TX200 S2 User’s Guide
8
Configuring Hardware and utilities
■ Console Redirection Submenu
This submenu configures detailed settings for console redirection.
■ RomPilot Submenu
The RomPilot is a remote console BIOS extended function.
This server cannot use this.
table: Items on the Console Redirection Menu
Item Setting Description
Console Redirection • Disabled (at the time of
purchase)
• Enabled
Sets whether to enable or disable console redirection.
When set to [Enabled] the following parameters
appear. Set each of them. If set to [Disabled], the
items are not displayed.
Port • Serial1 (at the time of
purchase)
• Serial2
Sets the serial port to be used for console redirection.
Media Type • Serial (at the time of
purchase)
•LAN
Sets the connection type for console redirection.
Baud Rate • 1200
•2400
•4800
• 9600 (at the time of
purchase)
• 19.2K
• 38.4K
• 57.6K
•115.2K
Sets the speed of the console redirection connection
(in bps).
Protocol • VT100
• VT100,8bit
• PC-ANSI,7bit
• PC-ANSI
• VT100+ (at the time of
purchase)
Sets the console type for console redirection.
Flow Control • None
• XON/XOFF
• CTS/RTS (at the time of
purchase)
Sets flow control for console redirection.
Mode • Standard
• Enhanced (at the time of
purchase)
Sets the range of use for console redirection.
table: Item on the RomPilot Menu
Item Setting Description
RomPilot Support Disabled (Fixed parameter) Sets whether or not to use RomPilot.