248
Chapter 8 Configuring Hardware and Utilities
■ CPU Status Submenu
This submenu sets whether or not to allow the use of the installed CPU.
■ Memory Status Submenu
This submenu sets whether or not to allow the use of the installed memory.
ASR&R Boot Delay • 2 (at the time of purchase)
•1–30
Sets the standby time for startup after shutdown due
to trouble (such as overheating) in minutes. The
system restarts after the set standby time.
Power Cycle Delay 5 (Fixed parameter) Sets the time until the server is turned on after it is
turned off.
Boot Retry Counter • 3 (at the time of purchase)
•0–7
Sets the maximum number of retries to boot the
operating system within the range of 0 to 7.
Diagnostic System Disabled (Fixed parameter) Sets whether or not to diagnose the BootDevice when
restarting with ASR&R.
Temperature Monitoring Disabled (Fixed parameter) Sets whether or not the server can be turned on when
the temperature is not in its operating environment
range (10-35 °C).
Memory Scrubbing Enabled (Fixed parameter) Sets whether or not to correct errors of memory space
that is currently not used by the OS or application
programs.
CPU Status
Press the [Enter] key to display the "
■ CPU Status Submenu" (pg.248) window.
Memory Status
Press the [Enter] key to display the "
■ Memory Status Submenu" (pg.248) window.
Console Redirection
Press the [Enter] key to display the "
■ Console Redirection Submenu" (pg.249)
window.
Rom Pilot
Press the [Enter] key to display the "
■ RomPilot Submenu" (pg.249) window.
table: Items on the CPU Status Menu
Item Setting Description
CPU 0 Status Enabled (Fixed parameter) Sets whether or not to allow the use of CPUs installed
in CPU Sockets 0 and 1.
CPU 1 Status
table: Items on the Memory Status Menu
Item Setting Description
Memory Module 0A Enabled (Fixed parameter) Sets whether or not to allow the use of memory in
Memory Slots 0A to 2B.
Memory Module 0B
Memory Module 1A
Memory Module 1B
Memory Module 2A
Memory Module 2B
table: Items on the Server Menu
Item Setting Description