Filter
Top Products
205
PRIMERGY TX200 S2 User’s Guide
Installing hardware options
7
7.6 Installing Internal Hard Disk
Units
This section explains how to install internal hard disk units.
Before adding an internal hard disk unit, install the OS and turn off the server.
• When installing or removing internal hard disk units, turn off the server, all
peripheral devices, and any other connected devices. Also unplug all power
cables from the outlet.
Failure to do so can cause electric shock.
• Install our genuine internal hard disk units only. Failure to do so may cause a
device failure, fire, or electric shock.
• When installing or removing hardware options, make sure to remove the
screws on the specified points only.
There is a chance of injury if screws other than those on the specified points
are removed. This could also damage the server.
• Touch only the specified part of the printed circuit board.
Failure to do so could cause injury and also damage the server.