Filter
Top Products
187
PRIMERGY TX200 S2 User’s Guide
Installing hardware options
7
3. Return the lever to fasten the CPU fan.
11 Install the CPU fan holder to the server.
To attach it, simply reverse the removal procedure.
12 Install the two ventilation system covers.
To attach them, simply reverse the removal procedure.
13 Install the side cover.
14 Turn on the server and start the BIOS Setup Utility. Initialize the Extended
System Configuration Data (ESCD) area.
1. Start the BIOS Setup Utility and set [Reset Configuration Data] on the [Advanced]
menu to [Yes].
2. From the [Exit] menu, select [Save Changes & Exit] and press the [Enter] key.
15 Store the BIOS settings.
"5.3.1 How to Store the BIOS Information" (pg.146)
• When installing the CPU fan holder, make sure not to damage the
cables.