Filter
Top Products
236
Chapter 8 Configuring Hardware and Utilities
8.2.4 Boot Options Submenu
Sets system startup options.
table: Items on the Boot Options Submenu
Item Setting Description
POST Errors Halt On All Errors (Fixed
parameter)
Sets whether or not to stop the boot process and shut down
the system, in case a POST (Power On Self Test) error is
detected.
Keyboard Check • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to check keyboard connection during
POST.
SM Error Halt Disabled (Fixed
parameter)
Sets the procedure in case an error occurs regarding the fan
or temperature sensor.
Fast Boot Disabled (Fixed
parameter)
Sets whether or not to reduce the scope of POST and thereby
speed up system startup.
Quiet Boot Disabled (Fixed
parameter)
Sets whether or not to display the logo screen instead of
POST information.
NumLock Auto (Fixed parameter) The state of the NumLock during activation.
Boot Menu Enabled (Fixed
parameter)
Sets whether or not to display the boot drive selection
window after POST.
By selecting the boot drive from the [Boot Menu] window,
startup can be done from the selected boot drive regardless of
the [Boot Sequence] setting.
MultiBoot for HDs • Disabled (at the time
of purchase)
• Enabled
Sets whether or not it is possible to specify the order of hard
disks to boot the operating system (OS) when multiple hard
disk units are installed.
To perform a PXE boot, set to [Enabled].
PhoenixBIOS Setup Utility
Item Specific HelpBoot Options
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
[Halt On All Errors]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Auto]
[Enabled]
[Disabled]
POST Errors:
Keyboard Check:
SM Error Halt:
Fast Boot:
Quiet Boot:
NumLock
Boot Menu:
MultiBoot for HDs:
Boot sequence:
>