Filter
Top Products
53
PRIMERGY TX200 S2 User’s Guide
2
Checking before OS Installation
2.3.5 Expansion Cards Supported by ServerStart
ServerStart supports automatic driver installation for the following expansion cards.
2.3.6 Cautions for Manual Installation
■ Notes on Using a RAID Card
The RAID card must be configured before the OS is installed. To check the RAID card settings, start up
WebBIOS. For more details, refer to "PRIMERGY ServerBooks" supplied with the server, and
"Supplement" supplied with options.
■ Free Space Required for Installation
The partition where the OS is installed must have enough free space for obtaining memory dump. For
more details, refer to "5.1 Memory Dump/Paging File Setting" (
pg.134).
■ Cautions on Restarting
In the course of installation, a message appears to indicate that the setup program restarts. Wait until it
restarts.
For background operations, refer to "PRIMERGY ServerBooks" supplied with the server, and
"Supplement" supplied with options.
table: Automatic Expansion Card Driver Installation
Name Model Bus
Onboard FDD/IDE - -
Onboard LAN - PCI
Onboard VGA - PCI
RAID Card PG-140D1 PCI
PG-142E3 PCI
LAN Card PG-1852 PCI
PG-1862 PCI
PG-1882 PCI
PG-1892 PCI
SCSI Ctrl U160 PG-128 PCI
Fiber Channel Controller PG-FC106 PCI