Filter
Top Products
221
PRIMERGY TX200 S2 User’s Guide
Installing hardware options
7
4 Remove the two dummy units.
Pull the dummy unit out slowly towards you, keeping the latches on the 5-inch storage bay rails
(on both sides) pressed inward.
Be sure to keep the removed dummy units for later use.
5 Detach the 5-inch storage bay rails from the removed dummy unit.
Remove eight screws that fix the 5-inch storage bay rails to detach.
6 Attach the removed 5-inch storage bay rails to the internal hard disk unit bay
conversion kit to be added.
Of the eight screws removed from the dummy unit when the 5-inch storage bay rails were
detached, use four metric threads to install the internal device.
Latches
Metric thread
Metric thread
Inch thread
Inch thread
* Also secure the opposite side in the same way.