GarrettCom MNS-6K 4.1.4 Switch User Manual


 
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
================================================
1 10.21.1.170 49 Enabled secret
2 10.21.1.123 49 Enabled some
3 -- -- -- --
4 -- -- -- --
5 -- -- -- --
Magnum6K25(user)## tacserver delete id=2
TACACS+ server is deleted.
Magnum6K25(user)## show tacplus servers
ID TACACS+ Server Port Encrypt Key
================================================
1 10.21.1.170 49 Enabled secret
2 -- -- -- --
3 -- -- -- --
4 -- -- -- --
5 -- -- -- --
Magnum6K25(user)## tacplus enable
TACACS+ is enabled.
Magnum6K25(user)##
FIGURE 73 – Configuring TACACS+
List of commands in this chapter
Syntax show tacplus <status|servers> - show status of TACACS or servers configured as TACACS+
servers
Syntax tacplus <enable|disable> [ order=<tac,local | local,tac>] - enable or disable TACACS
authentication, specifying the order in which the server or local database is looked up where “tac,local”
implies, first the TACAS+ server, then local logins on the device
Syntax tacserver <add|delete> id=<num> [ip=<ip-addr>] [port=<tcp-port>]
[encrypt=<enable|disable>] [key=<string>] [mgrlevel=<level>]
[oprlevel=<level>]
– adds a list of up to five TACACS+ servers where
<add|delete> – [mandatory] adds or delete a TACACS+ server.
id=<num> – [mandatory] the order in which the TACACS+ servers should be polled for
authenticaton
[ip=<ip-addr>] – [mandatory for add] the IP address of the TACACS+ server
[port=<tcp-port>] – [optional for add] TCP port number on which the server is listening
[encrypt=<enable|disable>] – [optional for add] enable or disable packet encryption
120