Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Chapter 10 – Port mirroring and
setup
Syntax show port-mirror – display port mirror settings
Syntax port-mirror <enter> - configure port mirror settings
Syntax setport monitor=<monitor port number> sniffer=<sniffer port number> - set port
mirror settings
Syntax prtmr <enable|disable> - enable or disable port mirror settings
Syntax device – configure device and port specific settings
Syntax
setport port=<port#|list|range> [name=<name>] [speed=<10|100>]
[duplex=<half|full>] [auto=<enable|disable>] [flow=<enable|disable>]
[bp=<enable|disable>] [status=<enable|disable>] – configure port settings
Syntax show port[=<Port number>] – display port settings
Syntax flowcontrol xonlimit=<value> xofflimit=<value> - configure flow control buffers
Syntax show flowcontrol – display flow control buffers
Syntax backpressure rxthreshold=<value> - configure backpressure buffers
Syntax show backpressure – display backpressure buffers
Syntax broadcast-protect <enable|disable> - protect switch from broadcast storms
Syntax rate-threshold port=<port|list|range> rate=<frames/sec> - change the allowed broadcast
rate threshold
Chapter 11 - VLAN
Syntax set vlan type=<tag|none> defines the VLAN type
Syntax vlan <enable|disable> - allow VLAN commands or configure vlan commands
Syntax vlan – enter the subset of VLAN commands
Syntax add id=<vlan Id> [name=<vlan name>] port=<number|list|range>
[forbid=<number|list|range>] [<mgt|nomgt>] - adding VLAN
291