Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Syntax lll del port=<port|list|range> - disable LLL on the list of specified ports
Syntax show lll – display the status of LLL
Syntax rstp – STP Configuration mode
Syntax rstp <enable|disable> - Start (Enable) or stop (Disable) STP
Syntax set stp type=<stp|rstp> - set the spanning tree protocol to be IEEE 802.1d or 802.1w (Rapid
Spanning Tree Protocol)
Syntax show active-stp – Display which version of STP is currently active
Chapter 15 – Dual-Homing
Syntax dualhome – enter the dual-homing configuration sub-system
Syntax dualhome <enable|disable> – enable or disable dual-homing
Syntax dualhome add port1=<port#> port2=<port#> – dual-homing setup similar to that of
unmanaged switches such as ESD42
OR
Syntax dualhome add primary=<port#> secondary=<port#> – dual-homing setup as primary-
secondary mode
Syntax dualhome del – Delete the dual-homing setup
Syntax show dualhome – Display dual-homing status
Chapter 16 – Link Aggregation
Control Protocol (LACP)
Syntax lacp - enable the LACP configuration module within CLI
Syntax lacp <enable | disable> - enable or disable LACP
Syntax add port=<number|list|range> [priority=<0-65535>] – add the specified list of ports to
form the logical LACP trunk. Default value for priority is 32768. The lower the value assigned to
295