GarrettCom MNS-6K 4.1.4 Switch User Manual


 
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Subsystem Description Severity
TCP/IP Duplicate IP a.b.c.d sent from MAC address XXXXXX C
TCP/IP Unable to allocate memory for an ICMP packet C
TCP/IP IP packet from a.b.c.d , with checksum error dropped D
TCP/IP Bad IP fragments from a.b.c.d dropped D
TCP/IP UDP checksum error in the received packet a.b.c.d D
TCP/IP TCP checksum error in the received packet a.b.c.d D
TCP/IP ICMP checksum error in the received packet D
TCP/IP Failed to initialize the interface x F
TCP/IP IP packet of version X is dropped I
VLAN Type set to port I
VLAN Type set to mac I
VLAN Type set to tag I
VLAN Type set to none I
VLAN Pvlan: port based vlan started I
VLAN Pvlan: default vlan is modified I
VLAN Tvlan: Tag based vlan started I
VLAN pvlan:vlan X enabled I
VLAN pvlan:vlan X disabled I
VLAN pvlan:vlan X deleted I
VLAN pvlan:port based VLAN started I
VLAN pvlan:port based VLAN stopped I
VLAN pvlan:default vlan is modified I
VLAN tvlan:vlan X deleted I
VLAN tvlan:vlan X enabled I
VLAN tvlan:vlan X disabled I
VLAN tvlan:tag based VLAN stopped I
VLAN tvlan:tag based VLAN started I
FIGURE 147 – Listing of severity - sorted by subsystem and severity
Please refer to the related chapters in this manual to find more information. For example, for the
VLAN subsystem, refer to the chapter on VLAN.
MAC Address Table
Syntax show address-table – displays the MAC addresses associated with ports – shows the MAC addresses
on the ports and displays to which port the packet with the specified MAC addresses will be switched to
Sometimes it is useful to see which port a specific packet will be switched to by examining the
internal MAC address table. The ‘show address-table’ command displays the internal switching
table.
277