GarrettCom MNS-6K 4.1.4 Switch User Manual


 
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
VLAN Port Status.
Port 14
Default ID : 1
Filter Status : ENABLED.
VLAN Memberships:
Vlan: 1 Status: Active UNTAGGED
Vlan: 10 Status: Active TAGGED
Vlan: 20 Status: Active TAGGED
Vlan: 30 Status: Active TAGGED
In the above example, "show-port" command provides a perspective on which VLANs are associated
with which ports, whether the VLANs are active, tagged or untagged. While the above instructions are
illustrative of how the commands are used, it is recommended to download the tech briefs on how to
configure VLAN on MNS-6K using Cisco Catalyst® switches or Magnum DX routers. These tech
briefs are available on the GarrettCom Inc. web site www.garrettcom.com – under Resources and
Support Software Support. On that page, look for the drop down on “Technical Briefs”
List of commands in this chapter
Syntax set vlan type=<tag|none> defines the VLAN type
Syntax vlan <enable|disable> - allow VLAN commands or configure vlan commands
Syntax vlan – enter the subset of VLAN commands
Syntax add id=<vlan Id> [name=<vlan name>] port=<number|list|range>
[forbid=<number|list|range>] [<mgt|nomgt>] - adding VLAN
Syntax start vlan=<name|number|list|range> activate the VLAN configuration
Syntax save save the configuration (including the VLAN configuration)
Syntax edit id=<vlan id> [name=<vlan name>] port=<number|list|range>
[<mgt|nomgt>] - edit existing VLAN name
Syntax show vlan [<id=vlanid>] display specific VLAN information
Syntax set-port port=<number|list|range> default id=<number> sets the default VLAN id.
For Magnum 6K family of switches, the default VLAN id is 1, unless changed using this command
Syntax set-port port=<number|list|range> filter status=<enable|disable> enables or disables
the VLAN filtering function.
145