GarrettCom MNS-6K 4.1.4 Switch User Manual


 
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
MNS-6K-SECURE Implementation
Syntax sntpserverenter the SNTP Server configuration mode
Syntax sntpsrv <start|stop> - Start or stop the SNTP Services
Syntax show sntpsrvdisplay the status of SNTP server
The usage of the commands are shown below.
Magnum6K25# sntpserver
Magnum6K25(sntpserver)##
Magnum6K25(sntpserver)## sntpsrv ?
sntpserver : Starts or Stops
Usage
sntpsrv <start|stop>
Groups: system
Magnum6K25(sntpserver)## show sntpsrv
SNTP SERVER Running
Magnum6K25(sntpserver)## sntpsrv stop
Stopping SNTP Server...
SNTP Server Stopped.
Magnum6K25(sntpserver)## show sntpsrv
SNTP SERVER Stopped
Magnum6K25(sntpserver)## sntpsrv start
SNTP server started.
Magnum6K25(sntpserver)## show sntpsrv
SNTP SERVER Running
Magnum6K25(sntpserver)## exit
Magnum6K25#
FIGURE 53 – Using the SNTP commands
A Tech Brief on the GarrettCom web site describes how this capability can be
used to create time servers in a network. To review this tech brief, please go to
www.garrettcom.com and click on Support Software Support and look for
Tech Briefs.
87