GarrettCom MNS-6K 4.1.4 Switch User Manual


 
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Command Description
set date year=<2001-2035> month=<1-
12> day=<1-31>
[format=<mmddyyyy|ddmmyyyy|yyyy
mmdd>]
sets the date and the format in which the date is
displayed
set daylight country=< country name> set the daylight saving time
set dns [server=<ip>] [domain=<domain
name>] <enable|disable|clear>
specify a DNS server to look up domain names.
The sever IP can be a IPV6 address as well as
an IPV4 address
set ftp mode=<normal|passive> set the ftp mode of operation
set history size=<1..100> Set the history stack size – i.e. the number of
commands to remember
set igmp mode= <normal|l2>
set the IGMP mode. Normal is when a L3
device is in the network and is the IGMP root.
The IGMP-L2 is used when there is no L3
device in the network
set logsize size=<1-1000> set the log buffer size
set motd
after the command is typed, MNS allows you to
enter the Banner message
set password set or change password
set prompt <prompt string>
set the prompt for switch. The prompt
has predefined variables. These are $n :
System Name; $c : System Contact; $l :
System Location; $i : System IP; $m :
System MAC; $v : Version; $$ : $
Character; $r : New Line; $b : Space
set secrets <hide|show> sets the system parameter to display or hide the
passwords
set serial [baud=<rate>]
[data=<5|6|7|8>]
[parity=<none|odd|even>]
[stop=<1|1.5|2>]
[flowctrl=<none|xonxoff>]
set serial port parameters
set snmp type=<v1|all> define the version of SNMP to use – the option
all supports all versions (v1, v2 and v3) – v1
restricts SNMP to v1 only. By default – SNMP
v1only is enabled
312