Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Command Description
show snmp displays the SNMP configuration information
show sntpsrv display the status of SNTP server
show ssh display ssh setting. For displaying the telnet
setting use show console
show s-ring show the status of S-Ring
show stp <config|ports > regardless of whether STP is enabled or disabled
(default) this command lists the switch’s full STP
configuration, including general settings and port
settings
show stp <config|ports> display the RSTP or STP parameters
show sysconfig displays the settable system parameters
show syslog display the syslog settings
show tacplus <status|servers> show status of TACACS or servers configured
as TACACS+ servers
show time displays the system time
show timezone displays the timezone information
show uptime displays the amount the time elapsed since the
last reboot or power failure
show version displays the version of MNS-6K being used
show vlan type=<port|tag>
[<id=vlanid>]
display specific VLAN information
show-authtrap displays the current value of authentication trap
status
show-deftrap displays the current value of default trap
show-forbid display the ports with GVRP forbid capabilities
show-forceversion the current forced version
show-group shows the multicast groups
show-group [id=<id>] display all or specific group entries - id is
optional and is the number corresponding to the
group entry number in the table
show-port display the port characteristics for IGMP
show-port [port=<port|list|range>] shows all parameters related to tag vlan for the
list of ports. If the port parameter is omitted, it
will display all ports
show-portweight display the weight settings on a port
319