Filter
Top Products
xviii
FIGURE 163 – Make sure to select the Xmodem protocol and the proper directory where the
configuration is saved. Click on Receive. This starts the file transfer. ......................................... 345
FIGURE 164 – Status window for Xmodem (using HyperTerminal under Windows XP) .................... 346
FIGURE 165 – Message which shows the completion of the file transfer (from ‘saveconf’ command) ........ 346
FIGURE 166 – Example of saveconf command for tftp ......................................................................... 346
FIGURE 167 – Upgrade using serial connection ................................................................................... 349
FIGURE 168 – File upload status window under Xmodem (using HyperTerminal under Windows
XP) ........................................................................................................................................ 349
FIGURE 169 – upgrading the switch using the serial interface ............................................................... 350
FIGURE 170 – Dialog for upgrading the image using tftp ..................................................................... 351
F
IGURE 171 – Updating the boot code over the network using the upgrade command. Make sure
to reboot the switch after the boot loader upgrade is completed .................................................... 353