Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
130
13 Enabled 19531 0 NO
14 Enabled 19531 0 NO
15 Enabled 19531 0 NO
16 Enabled 19531 0 NO
Magnum 25(device) # rate-threshold p rate6K # ort=11 =3500
Broadcast Rate Threshold set
Magnum6K25(device)## show broadcast-protect
======================================================================
PORT | STATUS | THRESHOLD (frms/sec) | CURR RATE (frms/sec) | ACTIVE
======================================================================
9 Enabled 19531 0 NO
10 Enabled 19531 0 NO
11 Enabled 3500 0 NO
12 Enabled 19531 0 NO
13 Enabled 19531 0 NO
14 Enabled 19531 0 NO
15 Enabled 19531 0 NO
16 Enabled 19531 0 NO
FIGURE 7 – Setting up broadcast storm protection. Also sh 7 ows how the threshold can be lowered for a
specific port
Port Rate limiting for broadcast
traffic
Please refer to the above section on broadcast storms.
List of commands in this chapter
Syntax show port-mirror – display port mirror settings
Syntax port-mirror <enter> - configure port mirror settings
yntax setport monitor=<monitor port number> sniffer=<sniffer port number> - set port
yntax prtmr <enable|disable> - enable or disable port mirror settings
yntax device – configure device and port specific settings
yntax
setport port=<port#|list|range> [name=<name>] [speed=<10|100>]
>]
yntax show port[=<Port number>] – display port settings
S
mirror settings
S
S
S
[duplex=<half|full>] [auto=<enable|disable>] [flow=<enable|disable
[bp=<enable|disable>] [status=<enable|disable>] – configure port settings
S