GarrettCom MNS-6K 4.1.4 Switch User Manual


 
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
============================================
VLAN ID | NAME | VLAN STATUS
============================================
1 | Default VLAN | Static Active
2 | Blue | Static Active
10 | dyn10 | Dynamic Active
Magnum6K25(gvrp)##
FIGURE 130 – Command to check for dynamically assigned VLANs
Note that port 10 must be enabled and configured to learn for it to be assigned to the dynamic
VLAN. To send advertisements, one or more tagged or untagged static VLANs must be
configured on one (or more) switches with GVRP enabled. MNS-6K allows a dynamic VLAN to
be converted to a static VLAN. The command to use is
Syntax static vlan=<VID> - convert a dynamic VLAN to a static VLAN
Note “show vlan type=tag” will display VID in case the VID is not known.
Magnum6K25# gvrp
Magnum6K25(gvrp)## show-vlan
============================================
VLAN ID | NAME | VLAN STATUS
============================================
1 | Default VLAN | Static Active
2 | Blue | Static Active
10 | dyn10 | Dynamic Active
Magnum6K25(gvrp)## static vlan=10
Magnum6K25(gvrp)## show-vlan
============================================
VLAN ID | NAME | VLAN STATUS
============================================
1 | Default VLAN | Static Active
2 | Blue | Static Active
10 | dyn10 | Static Active
FIGURE 131 – Converting a dynamic VLAN to a static VLAN
Per Port
“unknown
VLAN” (GVRP)
Per-Port Static VLAN Options
Tagged or Untagged Auto Forbid
VLAN 10 is converted to a
static VLAN
234