Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Magnum6K25(snmpv3)## show-user id=1
User ID : 1
User Name : jsmith
User Type : read-write
Auth. Pass something
Priv. Pass :
Auth. Type : MD5
Auth. Level : auth
Subtree :
Magnum6K25(snmpv3)## exit
Magnum6K25# show snmp
SNMPv3 Configuration Information
==================================
System Name : Magnum6K25
System Location : Fremont, CA
System Contact : support@garrettcom.com
Authentication Trap : Enabled
Default Trap Comm. : public
V3 Engine ID : 6K_v3Engine
Magnum6K25#
FIGURE 134 – Configuring SNMP – most of the command here are SNMP v3 commands
Configuring RMON
The switch supports RMON (Remote Monitoring) on all connected network segments. This
allows for troubleshooting and optimizing your network. The Magnum 6K family of switches
provides hardware-based RMON counters. The switch manager or a network management
system can poll these counters periodically to collect the statistics in a format that complies with
the RMON MIB definition.
The following RMON groups are supported:
• Ethernet Statistics Group - maintains utilization and error statistics for the switch port
being monitored.
• History Group – gathers and stores periodic statistical samples from previous Statistics
Group.
• Alarm Group – allows a network administrator to define alarm thresholds for any MIB
variable.
• Log and Event Group – allows a network administrator to define actions based on alarms.
SNMP Traps are generated when RMON Alarms are triggered.
251