Filter
Top Products
EN
Finding the solution
107
Error messages on the screen
Error messages on the screen
Error message Solution
Printer not responding/error
writing to LPT1
Check the following:
●
The Ready light is on.
●
The power cord and parallel or USB cable are correctly
connected.
Try the following:
●
Disconnect the power cord and parallel or USB cable at
both ends and reconnect them.
●
Use another IEEE-1284 compliant parallel or USB-1F
compliant cable.
Cannot access port (in use by
another application)
There is a device conflict. This might occur if another device is
installed on your computer and running status software. The
status software dominates the parallel port on the computer
and will not allow the HP LaserJet 1200 to access the port.
Try the following:
●
Disable all of the status windows for other printers.
●
Make sure that the printer’s port setting is correct. Access
the printer properties; see Printer properties (driver)
. The
port settings are on the
Details
tab.