Filter
Top Products
EN
Finding the solution
111
Printing Errors
A print job was not sent to
your desired printer.
Another printer with the
same or similar name may
have received your print
job.
Check the AppleTalk name of the
printer displayed on the self-test
page.
Make sure the cables are connected
correctly, the printer is on, and the
Ready light is on.
You cannot use the
computer while the printer
is printing.
Background Printing has
not been selected.
LaserWriter 8.3
Turn Background Printing on in the
Chooser. Status messages will now
be redirected to the Print Monitor
allowing you to continue working
while the computer is processing data
to be sent to the printer.
LaserWriter 8.4 and higher
Turn Background Printing on by
selecting File, Print Desktop, and
Background Printing.
An encapsulated
PostScript (EPS) file does
not print with the correct
fonts.
This problem occurs with
some software
applications.
Try downloading the fonts contained
in the EPS file to the printer before
printing.
Send the file in ASCII format instead
of binary encoding.
Your document is not
printing with New York,
Geneva, or Monaco fonts.
Select Options in the Page Setup
dialog box to deselect substituted
fonts.
USB Problems
Unable to print from a
third-party USB card.
This error occurs when the
software for USB printers
is not installed.
When adding a third-party USB card,
you might need Apple's USB Adapter
Card Support software. The most
current version of this software is
available from Apple’s web site.
Symptom Possible Cause Solution