Filter
Top Products
184 Chapter 11 Troubleshooting the print server
EN
57 UNABLE TO CONNECT
DHCP SVR
The print server received IP parameters from a DHCP server,
but communication with the DHCP server has been lost.
Check the status of the DHCP server.
If you assigned an infinite lease, the print server uses the IP
address of the most recent DHCP server used, but operation
might be degraded until a DHCP server responds.
58 POSTSCRIPT MODE
NOT SELECTED
The printer does not support AppleTalk or AppleTalk
extensions.
59 INCOMPLETE F/W –
MUST DOWNLOAD
Currently downloading firmware to the print server, or the
download did not complete properly.
5A TURN PRINTER
OFF / ON
The firmware download is complete. Turn the print server off
and back on.
83 DISCONNECTING FROM
SERVER
The server has been shut down because of a configuration
change or reset request. This message automatically clears
after a few seconds unless the printer is offline, in an error
state, or servicing another I/O port or another network
protocol.
Error Code and Message Description