Filter
Top Products
3 Remove the Solenoid connector (J204) from the DC Controller (Figure 6-22,
callout 1).
4 Remove the self-tapping screw that holds the Solenoid in place (Figure 6-22, callout
2).
5 Unthread the wires from the printer chassis.
6 Lift the Solenoid off.
Solenoid Removal (2 of 2)
Note
When reinstalling this part, the Paper Pickup Gear is keyed to go on the shaft in
only one way.
Figure 6-22
6 - 26 Removal and Replacement