Filter
Top Products
Transfer Roller Guide & Transfer Roller
1 Remove the Printer Covers, Pickup Roller Assembly (Figures 6-23 through 6-25),
and Paper Feed Frame (Figures 6-26 through 6-28).
2 Looking at the back of the printer, note the two small, hook-shaped release tabs on
each end of the Transfer Roller guide. Using a small, flathead screwdriver, carefully
pry each tab outward to release it (Figure 6-29).
3 Roll the released portion of the guide up. To remove the Transfer Roller Guide, pull
it off each end of the Transfer Roller shaft.
Transfer Roller Guide & Transfer Roller Removal
(Inside/Back View)
4 This exposes the Transfer Roller. Gently pry the gear side of the Transfer Roller out
first, then slide the other side out of its socket.
WARNING!
Do not touch the Transfer Roller or otherwise allow it to be contaminated.
To reinstall
The small, metal spring should rest under the Transfer Roller Guide.
Figure 6-29
Removal and Replacement 6 - 33