Filter
Top Products
Pressure Roller
1 Remove Printer Covers, Delivery Assembly (Figures 6-9 and 6-10), Fuser Pressure
Plate (Figure 6-11), and Heating Element (Figures 6-13 through 6-15).
2 Remove the Pressure Roller guide by lifting the edge (Figure 6-16, callout 1) and
then rolling it gently backward (Figure 6-16, callout 2).
Pressure Roller Removal
3 Lift the right end of the Pressure Roller up and out of the printer chassis. The left
side will follow easily with the Pressure Roller gear still attached.
Note
When reinstalling the Pressure Roller, apply a drop of grease to the grounding plate
on the right side of the shaft. (Refer to Chapter 8 for a part number.)
Figure 6-16
6 - 20 Removal and Replacement