Filter
Top Products
9 Rotate the metal case around so that the case is sitting on your work surface.
10 Remove the (7) remaining connectors (Figure 6-41, callout 1).
11 Remove the screws (5) that secure the DC Controller to the metal case (Figure 6-41,
callout 2).
DC Controller Removal (3 of 3)
12 Remove the DC Controller by lifting gently on the side opposite the formatter, then
sliding it out.
Caution
Be careful not to rotate the DC Controller as you remove it.
Note
When ordering, the DC Controller does not come with any connectors. Use the
current connectors or refer to the connector chart in Chapter 8 for ordering
information.
Figure 6-41
Removal and Replacement 6 - 45