Filter
Top Products
Main Cover and Paper Input Assembly
1 Remove the toner cartridge.
2 Remove memory door.
Caution
Remove the memory door first. The door will break if you remove the Main Cover
without removing the memory door.
3 Remove the EP Door Assembly.
4 Remove the Back Cover.
5 Remove the (2) screws from the top of the printer (Figure 6-6, callout 1).
6 Grasp the two lower, front corners of the printer and pull gently outward to release
the front of the Main Cover.
7 Lift the cover straight off.
8 Remove the Paper Input Assembly (Figure 6-6, callout 2) by rotating it forward and
lifting it out.
Main Cover and Paper Input Assembly Removal
Note
When replacing the Paper Input Assembly, make certain that the mylar sheet is
positioned between the Input Feed Roller and Separation Pad.
Figure 6-6
6 - 10 Removal and Replacement