Filter
Top Products
Back view of the HP all-in-one
1 Telephone wall jack
2 "IN" port on your answering machine
3 "OUT" port on your answering machine
4 Telephone (optional)
5 Answering machine
6 Phone cord supplied in the box with your HP all-in-one connected to the "1-LINE" port
To set up your HP all-in-one with a shared voice/fax line with answering machine
1 Remove the white plug from the port labeled "2-EXT" on the back of your HP all-
in-one.
2 Unplug your answering machine from the telephone wall jack, and connect it to
the port labeled "2-EXT" on the back of your HP all-in-one.
Note If you do not connect your answering machine directly to your HP all-in-
one, fax tones from a sending fax machine might be recorded on your answering
machine, and you probably will not be able to receive faxes with your HP all-in-
one.
3 Using the phone cord supplied in the box with your HP all-in-one, connect one
end to your telephone wall jack, then connect the other end to the port labeled "1-
LINE" on the back of your HP all-in-one.
Caution If you do not use the supplied cord to connect from the
telephone wall jack to your HP all-in-one, you might not be able to fax
successfully. This special phone cord is different from the phone cords
you might already have in your home or office. If the supplied phone cord
is too short, see The phone cord that came with my HP all-in-one is not
long enough for information on extending it.
4 (Optional) If your answering machine does not have a built-in phone, for
convenience you might want to connect a phone to the back of your answering
machine at the "OUT" port.
Chapter 10
66 HP Officejet 6200 series all-in-one