Filter
Top Products
Redial a busy or unanswered number automatically
You can set your HP all-in-one to redial a busy or an unanswered number
automatically. The default setting for Busy Redial is Redial. The default setting for
No Answer Redial is No Redial.
1 Press Setup.
2 Do one of the following:
– To change the Busy Redial setting, press 5, and then press 2.
This selects Advanced Fax Setup and then selects Busy Redial.
– To change the No Answer Redial setting press 5, and then press 3.
This selects Advanced Fax Setup and then selects No Answer Redial.
3
Press
to select Redial or No Redial.
4 Press OK.
Set automatic reduction for incoming faxes
This setting determines what your HP all-in-one does if it receives a fax that is too
large for the default paper size. With this setting turned on (the default), the image of
the incoming fax is reduced so that it fits on one page, if possible. With this feature
turned off, information that does not fit on the first page is printed on a second page.
Automatic Reduction is useful when you receive a legal-size fax and letter-size
paper is loaded in the input tray.
1 Press Setup.
2 Press 5, and then press 4.
This selects Advanced Fax Setup and then selects Automatic Reduction.
3
Press
to select Off or On.
4 Press OK.
Set backup fax reception
The HP all-in-one stores all received faxes in memory. If there is an error condition
that prevents the HP all-in-one from printing the faxes, Backup Fax Reception allows
you to continue receiving faxes. During the error condition, with Backup Fax
Reception enabled, the faxes are stored in memory.
For example, if the HP all-in-one is out of paper and Backup Fax Reception is
enabled, all received faxes are stored in memory. After you load more paper, you can
print the faxes. If you disable this feature, the HP all-in-one will not answer incoming
fax calls until the error condition is resolved.
Error conditions, such as the following, may prevent the HP all-in-one from printing
faxes:
● There is no paper loaded in the input tray
● There is a paper jam
● The print-carriage access door is open
● The print carriage is stalled
During normal operation (whether Backup Fax Reception is On or Off), the HP all-in-
one stores all faxes in memory. After the memory becomes full, the HP all-in-one
overwrites the oldest, printed faxes as it receives new faxes. If you want to delete all
the faxes in memory, turn off the HP all-in-one by pressing the On button.
User Guide 93