Filter
Top Products
4. While lifting the green lever, rotate the pick mechanism until it stays open.
5. Gently try to remove the page without tearing it. If you feel resistance, continue
with the next step.
6. Open the ADF and gently loosen the media by using both hands.
7. When the media is free, gently pull it out.
8. Close the ADF.
9. Lower the green lever.
10. Reinstall the jam cleanout part by inserting it as shown. Push down on the two tabs
until the part snaps into place.
NOTE: If the cleanout part is not replaced correctly, future jamming might
occur.
Chapter 10
196 Maintain and troubleshoot