HP (Hewlett-Packard) L7500 Printer User Manual


 
Use this tool... to do the following...
Configure network settings: Click the
Networking tab, and then click an option in the
left pane.
Set a static IP address: Click the Networking
tab, and then click either Wired 802.3 or
Wireless 802.11. In the IP Address
Configuration section, select Manual IP and
enter the static IP address. Enter the Manual
Subnet Mask and Manual Default Gateway, if
necessary, and then click Apply. For more
information, see
Troubleshooting tips and
resources.
NOTE: It is not recommended that you assign
a static IP address to the device. However, a
static IP address might resolve certain setup
and printing problems, such as a conflict with a
personal firewall.
Configure Direct Digital Filing settings:
Click the Settings tab, and then click Direct
Digital Filing Speed-dial.
Automatic fax report printing: Click the
Settings tab, and then click Fax in the left
pane. Then click the Advanced tab.
Setting up the dial type: Click the Settings
tab, and then click Fax in the left pane. Then
click the Basic tab.
Setting up redial options: Click the Settings
tab, and then click Fax. Click the Advanced tab.
Order supplies: On any tab, click the Order
Supplies button, and then follow the onscreen
instructions.
Support: On any tab, click the Support button,
and then select a support option.
Configure Bluetooth settings: Click the
Bluetooth tab.
Set the date and time: Click the Settings tab,
click Time Services in the left pane, type the
necessary values in the fields, and then click
Apply.
Toolbox (Windows)
Change tray settings: Click Paper Handling
on the Services tab.
Perform device maintenance tasks: Click the
Services tab.
HP Printer Utility (Mac OS)
Change tray settings: Click Paper Handling
from the Printer Settings panel.
Perform device maintenance tasks: Open
the Information and Support panel, and then
click the option for the task that you want to
perform.
(continued)
Manage the device 89