Filter
Top Products
• Transferring to a computer
• Selecting a proof sheet
Control-panel message types
This section contains the following topics:
•
Status messages
•
Warning messages
•
Error messages
•
Critical error messages
Status messages
Status messages reflect the current state of the device. They inform you of normal
operation and require no action to clear them. They change as the state of the device
changes. Whenever the device is ready, not busy, and has no pending warning
messages, the status message READY appears if the device is turned on.
Warning messages
Warning messages inform you of events that require your attention, but they do not
prevent the device from operating. An example of a warning message is CYAN INK
LOW. These messages appear until you resolve the condition.
Error messages
Error messages communicate that some action must be performed, such as adding
media or clearing a media jam. These messages are usually accompanied by a
blinking red Attention light. Take the appropriate action to continue printing.
If the error message shows an error code, press the Power button to turn off the
device, and then turn it on again. In most situations, this action solves the problem. If
the message persists, your device might need service. Write down the error code, and
then go to HP Instant Support to learn more about possible causes for the message.
For more information, see
HP Instant Support.
Critical error messages
Critical error messages inform you of a device failure. Some of these messages can
be cleared by pressing the Power button to turn off the device, and then turning it on
again. If a critical error persists, service is required. For more information, see
Support
and warranty.
Change device settings
You can change the device settings from these places:
• From the control panel.
• From the HP Solution Center (Windows) or HP Device Manager (Mac OS). For
more information, see
Use the HP photo and imaging software.
• From the embedded Web server. For more information, see
Embedded Web server.
Control-panel message types
25