Filter
Top Products
EN LJ 3100/3150 Service mode functions 103
2
Reports in Extended Service mode
The following chart shows reports that can be printed from Extended
Service mode and provides a brief explanation of each report.
Extended Service mode reports
Report Explanation
T.30 protocol trace Prints a report of the G3 protocol transmissions
and receptions.
SRAM dump Prints SRAM address values in an address
range that you select.
Scanner plots Prints the calibration page.
Log debug report Prints detailed fax and memory address
information. Fax information includes job
number, start time used, fax ID, transmission
type, pages, communication mode, and status.
Task stacks Prints address locations of various tasks.
Translations Prints text strings used in the display beginning
with the number you select. These text strings
are printed in the language currently in use by
the product. Compare the numbers in this
report to the numbers in an English report to
translate non-English messages on the display.
Printer fonts Prints all characters of fonts available in
memory.
Firmware version
(under “memory/
softswitch”)
Shows firmware revision information on the
control-panel display.
White reference
summary (under
“scanner”)
Displays average, minimum, and maximum
white reference values.